16-inch Poly Pedestrian Signals

Features

  • Meets or exceeds ITE specications.
  • Design provides minimum weight but maximum rigidity and strength.
  • The housing is designed  to work with a gasket supplied by LED manufacturer.
  • Mounting is completely compatible with all standard signal hardware.
  • The housing is designed  to accommodate 16-inch LEDs.
  • Heavy duty .250″ thick material.

Aluminum Signal

The 16 inch Aluminum Pedestrian Signal LED housing is one piece die-cast aluminum alloy, with two integrally-cast hinge lugs, screw slots, and openings at each end. The swing-down door is a single piece die-cast aluminum alloy, with two hinge lugs cast on the top of the door and two latch points on the bottom. The door is attached to the bottom of the housing using two hinge pins. Two eye bolts and wing nuts on the top allow the door to be opened and closed without the need for special tools.

Polycarbonate Signal

The Polycarbonate 16-inch Pedestrian Signal is available in three different colors, yellow, black and green. The LED housing is one-piece injection-molded  with hinge lugs, screw slots, and openings at each end. The swing-down door is a single piece injection-molded polycarbonate, with two hinge lugs molded on the bottom of the door and two latch points on the bottom. The door is attached to the bottom of the housing using two cotterless locking pins. Two eye bolts and wing nuts on the top allow the door to be opened and closed without special tools.

Signal Housing

The openings will accommodate standard  1.5“ pipe brackets. The bottom opening of the housing has an integrally-cast locking boss. The radial angular grooves of the locking boss provide 5 degree incremental positioning of the signal to eliminate rotation or misalignment of the signal. The housing is available with a knock-out plug at the top and bottom. This plug eliminates the need for additional hardware to close these openings when using a clamshell or post-top mounting bracket.

Visor Options

The egg crate visor option is designed  to eliminate sun phantom and minimize damage to the LED. The egg crate visor is inserted through the back side of the door and it overlaps by 1/2 inch. It is sealed when the door is closed, which prevents light from escaping between the visor and the door. The egg crate visor is available only in black. A tunnel visor is also available to be included either with or without the egg crate visor.

Aluminum Signals Only

  • Clamshell installation reference is facing the front of the signal. Clamshell holes drilled on one side only, if requested on S housing.
  • M housing has the top and bottom holes plugged and holes drilled on both sides for clamshell mounting.
  • M housing has 5 holes on right and left with knock-outs in place.
  • Peds are shipped without a door gasket or LED locking device.
  • Serration located on bottom. Adapter ring M20466 required for serrations on top.

Polycarbonate Signals Only

  • M housing has the top and bottom holes plugged and 5 knockouts on left and right side to accommodate clamshell mounting (L or R designations are not needed).
  • Serrations located on top and bottom.
  • Peds are shipped without a door gasket or LED locking device.
  • When ordering black housings or doors, use color designator B.

Visor Notes:

  • When ordering egg crate visor, use Visor color designator F.
  • When ordering assembly without Visor, use Visor type 0 and visor color designator F.
Download Datasheet for 16-Inch Aluminum and Poly Pedestrian Signals